Method 5013

Dyes


This method is for the determination of benzidine-, o-tolidine-, and o-dianisidine- dyes. The sample is collected on PTFE filters, desorbed with 2mL water in an ultrasonic bath, followed by HPLC analysis with ultraviolet detection. The working range is about 0.06 to 8 mg/m³ for a 250-L air sample. This method determines benzidine, o-tolidine or o-dianisidine from dyes based on these amines, but will not distinguish different dyes based on the same amine. The method will not distinguish benzidine obtained from reduction of the dyes and free benzidine in the dye formulation. Note: This revises P&CAM 325.


(NIOSH Issue 2: 15 August 1994)

Request-A-Quote

No Obligation Quotation for Analytical Services

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
Request-A-Quote

Method Data

Hold Times, Preservatives, Preps, Collection, Analytical & Documentation
Holding Time:   At least 7 days @ 25 °C in the dark.
Preservatives:   Keep samples dry and cool; protect from light during shipping and storage.
Required Preps:   5-µm PTFE membrane filter.
Collection Method:   PTFE membrane filter: 150L - 500L @ 1-3L/min.
Analytical Methodology:   HPLC/UV
Documentation:   5013

Analyte List*

Analyte Formula CAS Number Detection Limit
C.I. Direct Brown 95
16071-86-6
3
 µg
C.I. Direct Black 38
1937-37-7
3
 µg
C.I. DIRECT BLUE 8
2429-71-2
3
 µg
C.I. DIRECT BLUE 6
2602-46-2
3
 µg
C.I. Direct Red 28
573-58-0
3
 µg
C.I. Direct Red 2
992-59-6
3
 µg

* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.