This method is used for the collection and analysis of isopropyl acetate. The sample is collected on a coconut shell charcoal tube. After collection, the sample is desorbed in 1mL of carbon disulfide and analyzed using GC/FID (flame ionization detector).
The working range of the method is 1.5 to 450 ppm (6 to 1870 mg/m³) for an 8 L air sample.
NOTE: This is NIOSH Method S50 in a revised format.
No Obligation Quotation for Analytical Services
If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
| Hold Times, Preservatives, Preps, Collection, Analytical & Documentation | |
|---|---|
| Holding Time: | None specified in the method. |
| Preservatives: | None specified in the method. |
| Required Preps: | Charcoal tube, 50/100mg (SKC 226-01) |
| Collection Method: | The method recommends a flow rate of 0.02 - 0.2 L/min. and a 0.1 - 9L sample collection volume. |
| Analytical Methodology: | GC/FID |
| Documentation: | 
1454
|
| Analyte | Formula | CAS Number | Detection Limit | |
|---|---|---|---|---|
| Isopropyl acetate | C5H10O2 |
108-21-4 |
0.01 |
mg |
* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.