This method describes the sample collection and analysis of petroleum distillate fractions (PDF). Samples are collected by drawing a known volume of air through charcoal tubes. Samples are desorbed with carbon disulfide and analyzed by gas chromatography (GC) using a flame ionization detector (FID).
No Obligation Quotation for Analytical Services
If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
| Hold Times, Preservatives, Preps, Collection, Analytical & Documentation | |
|---|---|
| Holding Time: | At least 19 days. |
| Preservatives: | Store at room temperature. |
| Required Preps: | Solid sorbent tubes: coconut shell charcoal; 100mg/50mg 7cm x 6mmOD x 4mmID. |
| Collection Method: | Solid sorbent tube: coconut shell charcoal: 3 L at 0.2 L/min. |
| Analytical Methodology: | GC/FID |
| Documentation: | 
048
|
| Analyte | Formula | CAS Number | Detection Limit | |
|---|---|---|---|---|
| Stoddard solvent | 8052-41-3 |
|||
* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.