Method 32

Phenol and Cresol (All Isomers)


This method is for the determination of phenol and all isomers of cresol.  The analytes are collected on an XAD-7 sampling tube and desorbed with methanol.  The analysis is performed by HPLC with ultraviolet (UV) detection at 218 nm.


(OSHA)

Request-A-Quote

No Obligation Quotation for Analytical Services

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
Request-A-Quote

Method Data

Hold Times, Preservatives, Preps, Collection, Analytical & Documentation
Holding Time:   Rrecoveries of all analytes were >96% after 15 days storage at ambient and refrigerated temperatures.
Preservatives:   Store samples at refrigerated or ambient temperatures.
Required Preps:   XAD-7 tube, 100mg/50mg (SKC 226-95)
Collection Method:   The method recommends a flow rate of 0.1 L/min. and a 24L collection volume.
Analytical Methodology:   HPLC/UV
Documentation:   032

Analyte List*

Analyte Formula CAS Number Detection Limit
p-Cresol
C7H8O
106-44-5
1.1
 µg
m-Cresol
C7H8O
108-39-4
1.1
 µg
Phenol
C6H6O
108-95-2
0.97
 µg
o-Cresol
C7H8O
95-48-7
1.1
 µg

* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.