Method PV2123

Morpholine


This method is for the collection anad analysis of morpholine.  The sample is collected on a 10% phosphoric acid coated XAD-7 tube.  After collection, the sample is desorbed with 1Ml of 20% deionized water in methanol and analyzed by GC/FID (flame ionization detector).

NOTE:  This is a partially validated method.


(OSHA)

Request-A-Quote

No Obligation Quotation for Analytical Services

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
Request-A-Quote

Method Data

Hold Times, Preservatives, Preps, Collection, Analytical & Documentation
Holding Time:   Recoveries were above 87% for samples stored for 14 days if kept at ambient or refrigerated temperatures.
Preservatives:   Keep samples at ambient or refrigerated temperatures.
Required Preps:   10% phosphoric acid coated XAD-7 tube, 75/150mg (SKC 226-98)
Collection Method:   The method recommends a flow rate of 0.1 L/min. and a 10L sample collection volume.
Analytical Methodology:   GC/FID
Documentation:   PV2123

Analyte List*

Analyte Formula CAS Number Detection Limit
Morpholine
C4H9NO
110-91-8
0.46
 µg

* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.