Method 0023A

Sampling and Analysis Method for PCDD/PCDF Emissions from Stationary Sources


This method is used for the collection and analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from stationary sources.  The PCDDs/PCDFs determined are seventeen 2,3,7,8-substituted isomers considered to be the most toxic.  Total PCDDs/PCDFs by congener group (e.g. Total TCDD, Total PeCDD) are also reported.

Samples are collected isokinetically using a modified Method 5 train which consists of a glass fiber filter containing no organic binders, XAD-2 resin trap, and a series of impingers.  The sampling train is rinsed with acetone and methylene chloride followed by toluene.  The front half (FH) fractions of the train are prepared and analyzed separately from the back half (BH) fractions.  The FH consists of the FH rinses (nozzle, probe, FH filter holder) and glass fiber filter.  The BH consists of the BH rinses (BH filter holder and condenser coil) and XAD-2 resin trap.  This method contains no language that allows the FHand BH fractions of the train to be combined for analysis as in EPA Method 23.

FH acetone and methylene chloride rinses can be combined.  BH acetone and methylene chloride rinses can be combine.  However, no FH rinse can be combined with a BH rinse and toluene rinses should always be kept separately from acetone and methylene chloride.  Note that the impinger water may be discarded as it is not extracted and analyzed for PCDDs/PCDFs.

 


(EPA SW-846)

Request-A-Quote

No Obligation Quotation for Analytical Services

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we'll provide you a quote via email. As you are searching or browsing our Analytical Guide, you'll see the Request-A-Quote icon... just click on it to start the request process.
Request-A-Quote

Method Data

Hold Times, Preservatives, Preps, Collection, Analytical & Documentation
Holding Time:   30 days from sampling to extraction and 45 days from extraction to analysis.
Preservatives:   Protect all sample fractions from light. The method does not mention any preservation but if possible, all rinses and the XAD resin should be stored on ice for transport to laboratory (4°C± 2).
Required Preps:   Glass fiber filters free of organic binders and XAD-2 resin
Collection Method:   Modified Method 5 train following SW-846 Method 0023A procedures
Analytical Methodology:   GC/MS (high resolution) by SW-846 Method 8290
Documentation:   0023A

Products You Might Need

SKU Item Price
M23 EPA Method 23 Sampling System: Dioxin/Furans $ Call for Price
XAD-Trap XAD Trap, Standard Ball and Socket-Style $178.25 each

Analyte List*

Analyte Formula CAS Number Detection Limit
2,3,7,8-Tetrachloro-dibenzo-p-dioxin
1746-01-6
10
 pg
1,2,3,7,8,9-Hexachlorodibenzo-p-dioxin
19408-74-3
50
 pg
Octachlorodibenzo-p-dioxin
C12Cl8O2
3268-87-9
100
 pg
1,2,3,4,6,7,8-Heptachlorodibenzo-p-dioxin
35822-39-4
50
 pg
Octachlorodibenzofuran
39001-02-0
100
 pg
1,2,3,4,7,8-Hexachlorodibenzo-p-Dioxin
39227-28-6
50
 pg
1,2,3,7,8-Pentachlorodibenzo-p-Dioxin
40321-76-4
50
 pg
2,3,7,8-Tetrachlorodibenzofuran
C12H4Cl4O
51207-31-9
10
 pg
1,2,3,4,7,8,9-Heptachlorodibenzofuran
55673-89-7
50
 pg
2,3,4,7,8-Pentachlorodibenzofuran
57117-31-4
50
 pg
1,2,3,7,8-Pentachlorodibenzofuran
57117-41-6
50
 pg
1,2,3,6,7,8-Hexachlorodibenzofuran
57117-44-9
50
 pg
1,2,3,6,7,8-Hexachlorodibenzo-p-dioxin
57653-85-7
50
 pg
2,3,4,6,7,8-Hexachlorodibenzofuran
60851-34-5
50
 pg
1,2,3,4,6,7,8-Heptachlorodibenzofuran
67562-39-4
50
 pg
1,2,3,4,7,8-Hexachlorodibenzofuran
70648-26-9
50
 pg
1,2,3,7,8,9-Hexachlorodibenzofuran
72918-21-9
50
 pg
HpCDD, Total
 
HpCDF, Total
 
HxCDD, Total
 
HxCDF, Total
 
PeCDD, Total
 
PeCDF, Total
 
TCDD, Total
 
TCDF, Total
 

* The analytes and detection limits listed for each method represent the typical detection limits and analytes reported for that particular method. Keep in mind that analyte lists may vary from laboratory to laboratory. Detection limits may also vary from lab to lab and are dependent upon the sample size, matrix, and any interferences that may be present in the sample.